Harley Davidson

Softails

FLSTS/FLSTCI Heritage Classic

This system is designed to replace all factory hardware on the motorcycle and on the saddlebags while still using the factory Heritage saddlebags. If factory saddlebags are replaced with after market saddlebags see Models ST-R1 and ST-L1.

Heritage Softail 99 and earlier

Heritage Softail 99 and earlier with the detachable backrest. This is the same bracket as the HRT-R1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.

Heritage Softail 2000 - 2002

Heritage Softail 2000 - 2002 with detachable backrest. This is the same bracket as the HRT-R2 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.

Heritage Softail 2003 and newer

Heritage Softail 2003 and newer with detachable backrest. This is the same bracket as the HRT-R3 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.

• FXST/FXSTI Softail Standard
• FXSTB/FXSTBI Night Train
• FXSTS/FXSTSI Springer Softail
• FLSTF/FLSTFI Fat Boy
• FSLSTDB Cross Bones (2008 & Later)
• FLSTN/FLSTNI Softail Deluxe, Heritage Nostalgia & Heritage Special Note: The Softail Deluxe works with the ST-L1, ST-L1HB, ST-L1DB and ST-L1SDDB
• FLSTS/FLSTSI Heritage Springer (Does not fit Factory Saddlebags)
• FLSTSC/FLSTSCI Softail Springer Classic

This model is used on all softail models except the 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). The docking posts attach to the front two mounting holes in the fender rail. (6 ¼ “ apart) May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1

All Softails with Hardmount Backrest except the 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). This is the same bracket as the ST-R1 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.

All Softails with Detachable Backrest except the 2006 & later FXST, FXSTB and FXSTS , 2007 & later FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). This is the same bracket as the ST-R1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.

Not used with factory Heritage saddlebags. See HRT Models. This model is used on all softail models. The docking posts attach to the rear two mounting holes in the fender rail (9 1/4" apart). Turn signals must be relocated off the fender to use all ST-L1 models. Turn Signal Relocation kits are available for all models through Great Bike Gear (or see below).

All Softails with Detachable Backrest. Will work with Softail Deluxe with Standard Detachable Backrest. This is the same bracket as the ST-L1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately. Turn Signal Relocation kits are available for all models through Great Bike Gear (or see below).

All Softails with Hardmount Backrest. This is the same bracket as the ST-L1 but comes with longer mounting bolts. The backrest is not provided and must be purchased separately. Turn Signal Relocation kits are available for all models through Great Bike Gear (or see below).

FLSTN/FLSTNI  Softail Deluxe with New Deluxe Backrest. This is the same bracket as the ST-L1 but comes with different hardware. The backrest is not provided and must be purchased seperately.

This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models. The docking posts attach to the front two mounting holes in the fender rail. (5 5/8” apart) May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1

This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models with Hardmount Backrest. This is the same bracket as the ST-R2 but comes with different hardware.
The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.

This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models with Detachable Backrest. This is the same bracket as the ST-R2 but comes with different hardware.

FXSTC 2007 Softail Custom

This model is used on the 2007 FXSTC, Softail Custom. The docking posts attach to the front two mounting holes in the fender rail outside the backrest. (5 5/8” apart) May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1. If the stock backrest is replaced with the detachable backrest use ST-R2DB.

FXSTD/FXSTD1 Deuce

This models is used on the deuce, all years. This kit is to be used with a Mounting System for "The Deuce" DMS-EB manufactured and sold by Great Bike Gear. The mounting system is a formed chrome plate mounted under the fender rail on the deuce to provide mounting points for the Easy Brackets. The original turn signals remain in the factory location. This model is typicaly used with small to medium saddlebags.

DEUCE MOUNTING SYSTEM   

Used with "The Deuce"
A formed chrome mounting plate designed to provide mounting points for the Easy Bracket docking posts on “The Deuce”. The plate mounts under the rear fender rail without any modifications to the motorcycle, including the location of the turn signals. The plate is nearly invisible when the saddlebags are removed from the motorcycle. The kit is used with Easy Brackets model DUC-R1.

Dyna Glide

• FXD/FXDI Dyna Super Glide (96 to 2004) ( 2005 with Hard Mount Backrest use DNA-L1SG)
• FXDC/FXDCI Dyna Super Glide Custom (96 to 2005)
• FXDL/FXDLI Dyna Low Rider (96 to 2005)
• FXDX/FXDXI Dyna Super Glide Sport (96 to 2005)
• FXDXT/FXDXTI Dyna Sport Touring (96 to 2005)
• FXDWG/FXDWGI Dyna Wide Glide (96 to 2005)

Used on all Dyna models 96 to 2005. The docking posts attach to the front existing bolt hole and the turn signal hole after the turn signal is relcated. Turn signals is relocated off the fender to use all DNA models. Turn Signal must be relocated. Click here for turn signal relocation kits (or see below).

Used on all Dyna models 96 to 2005 with Hard Mount Backrest. This is the same bracket as the DNA-R1 but comes with longer mounting bolts. The backrest is not provided and must be purchased separately. Turn Signal must be relocated. Click here for turn signal relocation kits (or see below).

FXD: 2005 Dyna Super Glide with Hard Mount Backrest. This is the same bracket as the DNA-L1DB but comes with different bolts.

• FXDI Dyna Super Glide 2006 & later
• FXDCI Dyna Super Glide Custom 2006 & later
• FXDLI Dyna Low Rider 2006 & later
• FXDI35 35th Anniversary Super Glide 2006
• FXDBI Street Bob 2006 & later

Fits 2006 and later Dynas with or without Hard Mount Backrest except FXDWGI. Turn signals must be relocated off the fender al models. Turn Signal must be relocated. Click here for turn signal relocation kits (or see below).

Fits all 2006 and later Dynas except FXDWGI with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately. Turn Signal must be relocated. Click here for turn signal relocation kits (or see below).

FXDWGI  Dyna Wide Glide 2006 & later and FXDF Fat Bob 2008 & later with or without Hard Mount Backrest.  

Fits all 2006 and later Dynas FXDWGI and FXDF. with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.

Turn Signal Relocation Kits

FXD/FXDI  Dyna Super Glide
FXDC/FXDCI  Dyna Super Glide Custom
FXDL/FXDLI  Dyna Low Rider
FXDX/FXDXI  Dyna Super Glide Sport
FXDXT/FXDXTI  Dyna Sport Touring     
FXDI35  35th Anniversary Super Glide 2006 
FXDBI  Street Bob 2006 & later

TSDNALD-01C (01 & earlier) MSR 89.95
TSDNALD-02C (02 - 05) MSR 89.95
TSDNALD-03C (2006 & later) MSR 89.95

This kit only works with the existing wing standoff.      

FXDWG/FXDWGI  Dyna Wide Glide and FXDF Fat Bob

TSDWG-01 (01 & earlier) MSR 49.95
TSDWG-02 (02 & later) MSR 49.95

Mounts to the license plate mount for a clean attractive look.  This kit only works with the existing wing standoff.

Relocation kits TSDNALD-01 (01 & earlier), TSDNALD-02 (02 through 05), or TSDNALD-03 (2006) are available from GBG. This kit is used only with a laid down license plate manufactured by CCI or DRAG Specialties. This kit only works with the wing standoff not provided in the kit.

Relocation kits TSDNALD-01C, TSDNALD-02C and TSDNALD-03C (2006 and later) are available from GBG. This kit is complete and does not need the laid down license plate manufactured by CCI or DRAG Specialties. This kit only works with the wing standoff not provided in the kit.

FXDWG: Dyna Wide Glide

Relocation kits TSDWG-01 (01 & earlier) or TSDWG-02 (02 to present) are available from GBG.

FXR

FXR & FXLR Models 90 & later. Note: Does not fit FXRP. This model is used on the FXR models. The docking posts attach to the front hole in the fender rail and the turn signal hole after the turn signal is relocated off the fender rail. Note: Turn signals must be relocated off the fender on all FXR models. Great Bike Gear does not currently offer a turn signal relocation kit for this model. This model is typically used with small to medium saddlebags.

FLH

Older Harley Davidson FLH Models. This model is used on the older FLH models. The docking posts attach to the two mounting holes in the fender rail. Holes must be 7 1/4" center to center.

Sportster

XL 883R                                               XL 1200C  Custom
XL 883L  Low                                      XL 1200R  Roadster          
XL  883                                                 XL 1200L
XL  883 Hugger
XL 883C  Custom

This model is used on all sportsters 94 to 03. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is the standard Easy Bracket depth. This model may be used if a smaller saddlebag is used and located behind the rear shock. Turn signals must be relocated off the fender on all Sporster models. Turn Signal Relocation Kits available from GBG. Click here for more information.

This model is used on all sportsters 94 to 03. Works with or without hard mount backrest. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is deeper than the standard Easy Bracket to provide clearance outside the rear shock. The model SPT-R1S may be purchased if a smaller saddlebag is used and located behind the rear shock. This model is typically used with small to medium sadlbags. Turn signals must be relocated off the fender on all Sporster models. Turn Signal Relocation Kits available from GBG. Click here for more information.

This is the same bracket as the SPT-R1 but is used with a Detachable Backrest and comes with longer bolts. Turn Signal Relocation Kits available from GBG. Click here for more information.

This is the same bracket as the SPT-R1S but comes with different hardware due to changes made in 2004. Fits 04 & later. Turn Signal Relocation Kits available from GBG. Click here for more information.

This is the same bracket as the SPT-R1 but comes with different hardware due to changes made in 2004. Fits 04 & later. Turn Signal Relocation Kits available from GBG. Click here for more information.

This is the same bracket as the SPT-R2S but is used with a Detachable Backrest and comes with different hardware.

Turn Signal Relocation Kits

XL 883R                                               XL 1200C  Custom
XL 883L  Low                                      XL 1200R  Roadster          
XL  883                                                 XL 1200L
XL  883 Hugger
XL 883C  Custom

Relocation kits TSSTLD-01 (01 & earlier) or TSSTLD-02 (02 to present) are available from GBG. This kit is used only with a laid down license plate manufactured by CCI or DRAG Specialties. This kit only works with the wing standoff not provided in the kit.

Relocation kits TSSTLD-01C (01 & earlier) or TSSTLD-02C (02 to present) are available from GBG. This kit is complete and does not need the laid down license plate manufactured by CCI or DRAG Specialties. This kit only works with the wing standoff not provided in the kit.